Obsnap Instruments Sdn Bhd
29A, Jalan SS 15/4C, 47500 Subang Jaya, Selangor, Malaysia.
+603-5621 5786
+603-5621 5829
+60122185651 (Enquiry)
+60162233687 (Vacancy)
Obsnap Service Department provide high quality repairs service
07 Jun 2016
Obsnap has the technical service & support capability you need Obsnap Service Department who is ready to provide you with high quality repairs service and with what we believe to be the fastest turn-around in the industry. We have one of most experienced team, with our leading service engineer, William has more than 20 years combining experience, knowledge and skill with electronic and automated equipment, your repairs are in good hands. We,
· Repair all major brands & models of equipment
· Factory trained & certied technicians
· Quick turn-around
.jpg)
YES! Obsnap has done it again. In a two- days trip,
· We have rectified a 300J Impact Tester that had a computer corrupted issue in a university
· Resolved erroneous readings defect of a 100 ton Hydraulic Universal Testing Machine (UTM) of an oil &
gas metal fabricator.
· Installed a brand new Victor 100 ton Hydraulic Universal Testing Machine (UTM) for a pipe manufacturer.
Here was the timeline of our dedicated technical team during these two days. William woke up at 4:45am and after brief preparation, he headed to Samson’s house in Puchong , where they travelled in one car to Kuantan at 6am before the sun rise.
Obsnap team arrived at the first stop, university around 10am. It was a quick one. We completed the repair service of the 300J Impact Tester in a couple of 2 to 3 hours. After lunch, William & Samson worked on the metal fabricator’s Hydraulic UTM and subsequently installing the new Hydraulic UTM. Our team worked around the clock, at 11pm we finished installed and fine-tuned the machine operation. Only then William & Samson went to look for the hotel and had their dinner at 12am midnight!
The next morning, the team divided the tasks. William moved on to further repair with the Hydraulic UTM and Samson was to provide the commissioning and training of the new Victor 100 ton Hydraulic UTM. Finally, at around 7pm, Obsnap team has fulfilled all the missions. The repaired Hydraulic UTM continued to serve customer on the route to ISO 17025 accreditation and the new Victor 100 ton Hydraulic UTM is fully calibrated, tested and started to serve its new user.
To repair a defective equipment can be a diffi‑cult project for an amateur, you can pass it to Obsnap’s technical professional.
Please contact us for your repair service needs at Tel: 03-5621 5786 or email us at technical@obsnap.com
View Full Size
Obsnap has the technical service & support capability you need Obsnap Service Department who is ready to provide you with high quality repairs service and with what we believe to be the fastest turn-around in the industry. We have one of most experienced team, with our leading service engineer, William has more than 20 years combining experience, knowledge and skill with electronic and automated equipment, your repairs are in good hands. We,
· Repair all major brands & models of equipment
· Factory trained & certied technicians
· Quick turn-around
YES! Obsnap has done it again. In a two- days trip,
· We have rectified a 300J Impact Tester that had a computer corrupted issue in a university
· Resolved erroneous readings defect of a 100 ton Hydraulic Universal Testing Machine (UTM) of an oil &
gas metal fabricator.
· Installed a brand new Victor 100 ton Hydraulic Universal Testing Machine (UTM) for a pipe manufacturer.
Here was the timeline of our dedicated technical team during these two days. William woke up at 4:45am and after brief preparation, he headed to Samson’s house in Puchong , where they travelled in one car to Kuantan at 6am before the sun rise.
Obsnap team arrived at the first stop, university around 10am. It was a quick one. We completed the repair service of the 300J Impact Tester in a couple of 2 to 3 hours. After lunch, William & Samson worked on the metal fabricator’s Hydraulic UTM and subsequently installing the new Hydraulic UTM. Our team worked around the clock, at 11pm we finished installed and fine-tuned the machine operation. Only then William & Samson went to look for the hotel and had their dinner at 12am midnight!
The next morning, the team divided the tasks. William moved on to further repair with the Hydraulic UTM and Samson was to provide the commissioning and training of the new Victor 100 ton Hydraulic UTM. Finally, at around 7pm, Obsnap team has fulfilled all the missions. The repaired Hydraulic UTM continued to serve customer on the route to ISO 17025 accreditation and the new Victor 100 ton Hydraulic UTM is fully calibrated, tested and started to serve its new user.
To repair a defective equipment can be a diffi‑cult project for an amateur, you can pass it to Obsnap’s technical professional.
Please contact us for your repair service needs at Tel: 03-5621 5786 or email us at technical@obsnap.com
