Voltage output Module GL 7000 Data Acquisition Equipment Malaysia, Selangor, Kuala Lumpur (KL) Supplier, Suppliers, Supply, Supplies

Obsnap Instruments Sdn Bhd
29A, Jalan SS 15/4C, 47500 Subang Jaya, Selangor, Malaysia.

+603-5621 5786

+603-5621 5829

sales@obsnap.com

+60122185651 (Enquiry)

+60162233687 (Vacancy)

Message Us

Voltage output

Voltage output Module GL 7000 Data Acquisition Equipment

Quantity

Add Quotation

Modules allow wide range of measurements
Suitable for a variety of measurements due to
flexible combinations

Measurements for different applications can be added to the
module. It is also possible to mix measurements by adding
different types of modules.

Item	Agriculture, Forestry, and Fisheries	Construction, & Public Works	Machinery industry	Electrical equipment industry	Transportation equipment industry	Energy (Electricity, Gas)
Voltage module GL7-V	Solar radiation, CO2 Moisture, PH Strength of the wood	Tensile strength of the material	Load of press machine Valve opening and closing angle	UPS test Operation dislocation Sensor development	Torque in the converter Automotive battery test	Water heater control circuit
Voltage/Temp. module GL7-M	Temperature wind speed in plant Aquaculture environmental temperature	Indoor and outdoor temperature Adiabatic wall temperature	Machine tool temperature Aging chamber temperature	Air conditioner temperature Refrigerator temperature Environmental testing	Engine room temperature Environmental testing, Cold climates test Bearing durability test	Water heater temperature
High-speed voltage GL7-HSV	Flow measurement	Displacement measurement	Machine/motor load	Inverter control signal Sensor operating characteristics	Airbag test Injection characteristics	Inverter control signal
High voltage module GL7-HV	Power supply measurements	Power supply measurement of equipment	Power supply to the machine	High voltage circuit Power supply measurements Inverter control signal	Battery for electric vehicles Hybrid vehicle battery	High voltage circuit Inverter control signal
Bridge module GL7-DCB	Pressure of fishing nets Water pressure measuremen	Strain of the building Research and maintenance of structure Load of the structure	Distortion of the press Distortion of welding Tensile strength test	Substrate strain Distortion at the opening and closing operation	Distortion in the opening and closing of the door Distortion in the vibration Distortion of body	Distortion of the structure
Charge module GL7-CHA		Seismic isolation measurement Research and maintenance of structure Vibration of installed products	Movement of the robot Vibration of the motor, pump Vibration of bearings	Vibration of the enclosure Drop test Substrate vibration	Running test Shaking test Vibration of an engine	Vibration of the enclosure
Logic/Pulse module GL7-L/P	Plant factory Precipitation		Control signal of the device Gear rotation speed Flow velocity, flow rate	Control signal of the machine Rotation of the motor Pulse count	Rotation of the engine Rotation of the motor	Control signal Flow velocity, flow rate
Voltage output module GL7-DCO		Seismic test	Vibration reproduction Machine motion reproduction	Operating condition reproduction Test reference signal Machine movement reproduction	Driving vibration reproduction

Extending Modules

Measurements for different applications can be added to the module

Up to 10 modules can be attached to one main unit

Maintains the maximum sampling speed even when

the number of input modules are incarcerated.A wide variety of measurements can be supported
by the input module. Up to 10 modules can be attached for multi-channel measurements,
with up to 112 channels on one GL7000.

Maintains the maximum sampling speed even when the number of input modules
for voltage or voltage/temperature are increased. (In the high-speed voltage
module and Logic/Pulse module, the maximum sampling speed varies by selected
data storage device.)

Measurements in large-scale channel

Up to 1120 channels can be measuring using the PC platform

Up to 10 units of the GL7000 can be connected to 1PC through LAN or USB and controlled
using the software.

Up to 5 units of the GL7000 can be fully synchronized using the sync. cable

The start/stop, trigger and sampling can be synchronized in the GL7000 when
they are connected by a sync. cable. The master and slave units are automatically identified.

*The sync. cable is optional (B-559).

Touch panel system

Attaching the high-definition display module with touch panel allows stand-alone operation or embedding into a system

The touch panel makes setting the conditions intuitive,and it can also be operated using the cursor keys similar to the GL series.

The detachable display module allows both stand-alone and embedded system configurations

Measurement settings and signal measurement
can both be done without a PC by attaching the
display module. The display module can be moved
to different locations for remote operation by
connecting it to the main module with a LAN cable*,
it also can be embedded into the system. The module
can stile be operated by the PC even when the display
module is connected.
* Up to 10m using CAT5 LAN cable (straight connection)

Large easy-to-read 5.7-inch (VGA 640 x 480) high-definition LCD monitor

Utilizes a bright clear TFT color LCD monitor. Makes it easy to read data in waveform or digital form and to check measurement parameter settings.

Supports multiple storage

Supports multiple destinations to save the captured data
according to the conditions of the measurement

Supports multiple types of storage and network function according to the condition of the measurement.

Supports multiple types of storage

Built-in RAM	RAM is built into each modules to allow saving of up to 2 million samples. Increasing the number of channels does not decrease the data capture duration.
Built-in Flash memory	2GB of Flash memory is built into the main module. Captured data can be saved directly to the flash memory when sampling speed is less than 1kS/s (1ms). Non-volatile memory (saved data is retained even if the power is turned off).
SD memory card (*1)	SD card slot (supports SDHC, up to 32GB) is standard on the main module. Captured data can be saved directly on the SD card when sampling speed is slower than 1kS/s (1ms). Supports hot-swap where SD memory card can be replaced during recording without any data loss. (*2)
SSD module (64GB)	Allows multiple recording of large amount of data to be saved when optional SSD module is used. It has a high vibration resistance and the captured data can be saved directly to the SSD when sampling is not faster than 1MS/s (1μs). (*3)

*1: The file for capturing data is limited up to 2GB. There is function that saving data to multiple files without losing data
until capturing data is stopped.
*2: This function is available when sampling speed is up to 10 samples/s (100ms interval).
*3: Number of modules are limited.

Support interface frendly with the PC

Supports Ethernet and USB2.0

Ethernet (10BASE-T, 100BASE-TX) and USB2.0 (hi-speed) interface are standard.
Each interface port is located in the front of the unit for easy cable connection.

It supports the following functions.

WEB server, FTP server function	It can be controlled by using a WEB browser, and signal can also be monitored. It supports accessing the captured data in memory device.
FTP client function	Captured data is periodically transferred to the FTP server for backup.
DHCP client function	The IP address of the GL7000 is automatically obtained from the DHCP server.
NTP client function	The clock on the GL7000 is periodically synchronized with the NTP server.
USB drive mode	GL7000 can emulate an external USB device for quick data file transfer when is is started in the USB drive mode. The file in the memory device can be transferred to the PC by drag & drop feature.

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Ship to Name
Shipping Address
Attachment		*only support gif, jpeg, jpg, png, pdf
Messages*

available in