Obsnap Instruments Sdn Bhd
29A, Jalan SS 15/4C,
47500 Subang Jaya,
Selangor, Malaysia.
+603-5621 5786
+603-5621 5829

TQC sheen - Adhesion Testers - Cross Cut Adhesion Tester - Cross Cut Adhesion Test KIT CC3000

Previous 15 / 42 Next

TQC sheen - Adhesion Testers - Cross Cut Adhesion Tester - Cross Cut Adhesion Test KIT CC3000 Paint Strength Testers Coating / Paint Testing

Quantity
Add Quotation


Overview

Application

The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.

The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.

Each TQC Cross Cut Adhesion Test KIT CC3000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.

Features
  • The blade holder is kept at a set distance from the surface with the aid of two wheels (ball bearings). Reproducible test results guaranteed.
  • Ergonomically shaped handle
  • Easy to change cutting knife
  • Wide range of knife sizes available for different coating thicknesses and substrates and according to different standards.
​Each TQC Cross Cut Adhesion Test KIT CC3000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.

ORDERING INFORMATION

Knives and tape can be ordered as a spare as well

Art. No. SP1680
TQC Cross Cut Adhesion Test CC3000, 6 blades, cutting distance 1 mm
Acc. to ISO 2409 & ASTM D3359

Art. No. SP1681
TQC Cross Cut Adhesion Test CC3000, 6 blades, cutting distance 2 mm
acc. to ISO 2409 & ASTM D3359

Art. No. SP1682
TQC Cross Cut Adhesion Test CC3000, 6 blades, cutting distance 3 mm
Acc. to ISO 2409

Art. No. SP1683
TQC Cross Cut Adhesion Test CC3000, 11 blades, cutting distance 1 mm
Acc. to ASTM D3359 <2009

Art. No. SP1684
TQC Cross Cut Adhesion Test CC3000, 11 blades, cutting distance 1.5 mm
Acc. to ASTM D3359 <2009

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Messages*  
   


You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
available in
Subscribe Newsletter