Obsnap Instruments Sdn Bhd
29A, Jalan SS 15/4C, 47500 Subang Jaya, Selangor, Malaysia.
+603-5621 5786
+603-5621 5829
+60122185651 (Enquiry)
+60162233687 (Vacancy)

Thermohygrometer with Dewpoint HI9565

Previous 3 / 3 Next

Thermohygrometer with Dewpoint HI9565 Relative Humidity / Lux  Water / Liquid Analysis

Add Quotation

*This is the updated version of this product

HI9565 is a portable thermohygrometer designed to provide peak performance in harsh environments. Measurements of temperature, relative humidity, and dew point are made easy with the rugged, water-resistant housing of the meter and durable casing of the HI70602 probe. HI9565 features an auto-off function after 20 minutes of inactivity, temperature readings in both Celsius and Fahrenheit, and on-screen messages to direct procedures and indicate potential errors.
  • ABS body RH probe with built-in microchip
  • °C/°F temperature readout
  • Dew point measurement range


Thermo-hygrometer HI9564Hold Button
A simple press of the HOLD button allows you to freeze a measurement on the LCD screen. Even in HOLD mode, the meter channels can still be scrolled through to show the status of the meter when HOLD was pressed.

Low Battery Indicator
The included batteries provide 10,000 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. When low battery power may affect your results, the meter will shut down to avoid erroneous readings caused by low battery level.

Automatic Shut-off
The auto-off feature can be set to shut the meter off at 8 or 60 minutes, or it can be disabled so that the meter continuously stays on. The auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on.



Built to be Durable
Designed to withstand the knocks, drops, and spills of real life, the new IP67 body ensures top performance in any environment. These meters are protected against dust and water intrusion from any direction.

Portable Design
Made to fit comfortably in your hand for on-the-go testing, the multilevel LCD display provides at-a-glance readings of relative humidity (RH) and temperature from any angle and dual button operation streamlines the testing process for any user. 

Quick Connect Probe
A Quick Connect DIN connector makes attaching and removing the probe simple and easy. The rubber coating protects the cable and provides a water-tight seal without twisting. The connection is located at the base of the meter so that wires are out of the way when you measure.



Your measurements require detailed attention; so should your electrode. HI9565 is supplied with HI706023 RH/temperature probeThe HI706023 is a thin-film polymer capacitive (TFPC) sensor that accurately measures relative humidity and temperature. Encased in a durable ABS housing, the probe features a perforated cap to allow for better sample interation for more accurate measurements.

Smart Probe
The HI706023 RH/temperature probe is a “smart probe” meaning that it has an electronic sensor that tracks the probe's performance and stores the calibration history directly onto the probe.

Wide Measuring Range
As compared to the previous model, the HI706023 is more accurate with a wider RH range, able to measure from 0.0 to 100.0 % RH.

No Need to Calibrate
To make testing even easier, the HI706023 probe come factory calibrated and requires no user calibration.

HI9564 ModelsHI9565 Models

Old HI9565 (Left)
Uses the HI70602 RH/temperature probe with DIN Connector

New HI9565 (Right)
Uses the HI706023 RH/temperature probe with Quick DIN Connector


RH Range 0.0 to 100.0 % RH
RH Resolution 0.1% RH
RH Accuracy ±2.5 % RH (0 to 90 % RH); ±3.5 % RH (90 to 100 % RH);
Temperature Range -10.0 to 60.0°C / 14.0 to 140.0°F
Temperature Resolution 0.1°C / 0.1°F
Temperature Accuracy ±0.4 °C / ±0.8 °
Dew Point Range -20.0 to 60.0°C / -4.0 to 140.0°F
Dew Point Resolution 0.1°C / 0.1°F
Dew Point Accuracy ±2°C /±4°F (50 to 85 % RH and 15 to 40°C); ±4.5°C /±9°F (outside)
Electrode/Probe HI706023 RH/temperature prob
Battery Type/Life 1.5V AAA / approximately 10,000 hours of continuous use
Environment 0 to 60°C (32 to 140°F); RH max 98% non-condensing
Dimensions 154 x 63 x 30 mm (6.1 x 2.5 x 1.2”)
Weight 196 g (6.91 oz.)
Ordering Information HI9565 is supplied with HI706023 RH/temperature probe, 1.5V AAA batteries (3) and instruction manual.
Warranty 2 years

Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
Ship to Name  
Shipping Address  
*only support gif, jpeg, jpg, png, pdf

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
available in
Subscribe Newsletter