Obsnap Instruments Sdn Bhd
29A, Jalan SS 15/4C,
47500 Subang Jaya,
Selangor, Malaysia.
+603-5621 5786
+603-5621 5829

Hanatek - Rub and Abrasion Tester (RT4)

Previous 25 / 36 Next

Hanatek - Rub and Abrasion Tester (RT4) Gloss/DOI/Haze/Appearance Testers Coating / Paint Testing

Quantity
Add Quotation


The Hanatek Ink Rub Tester (Rub & Abrasion Tester) brings new levels of repeatability and convenience to testing the durability of inks and coatings on any printed material.

The instrument is used for testing the scuff, marking and rub resistance of cartons, films and commercial printed material.

This comparative test works by abrading a printed sample against a reference material under known conditions.
The results can be used to identify alternative substrates, better ink and coating formulations or the suitability of finished cartons, films or printed books, magazines and promotional materials.

The Hanatek Ink Rub Tester can be programmed for the required number of cycles, enabling it to be run concurrently with other laboratory tests.

Optional test attachments offer the ability to conduct tests under harsher conditions and can be used to check the solvent resistance or the cure of UV inks

Ink Rub Tester Operation:

Instrument platen and test head are driven at an identical speed of 1 rev/sec. This creates a very even abrasion between the top surface and the entire area of the larger test sample.

An air hose blows away sample test debris to ensure no additional abrasion from loose ink particles.

After testing, the 2 samples are visually analysed.

Rub Tester Features:

Choice of Measuring heads
The instrument is supplied as standard with the felt measuring head and pad.

This is suitable for the face to face (printed surface to printed surface) method described in BS 3110 and also the printed surface to reference material such a Mellotex.

Alternative measuring heads/pads are available for conducting:

    • Abrasion test

Abrasion -test-ink-rub-tester

This test is to check the through cure of coatings and UV varnish. This test will mimic the effect of transportation on printed material.

    • Wet rub test

rub-and-abrasion-2

This test checks for coating resistance to water/solvent

Touch screen operated
Intuitive touch screen operation ensures incredibly quick configuration of test parameters .

Automatic abrasion cycles
The cycle time is pre-programmed allowing the test to run unsupervised

Sample Preparation

  • The instrument is supplied with cutting templates.  For faster and safer sample preparation, the Hanatek Universal Sample Cutter is recommended.

This allows for simultaneous cutting of 50mm and 115mm ø samples.

 

Standards

 

  • BS 2110
  • Programmable testing

Weights

  • 0.5, 1.0 and 2.0 Psi pressure

Certification

  • UKAS traceable calibration certificates (Instrument and test masses)
  • ISO17025 calibration certificates available on request

Warranty

  • Free extended two year comprehensive guarantee as standard
Power

 

  • 110/240V 50/60V

Net Weight

  • 10kg

Dimensions

  • (H) 420mm x (W) 350mm x (D) 250mm

Commodity code

  • 9024 8011

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Messages*  
   


You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
available in
Subscribe Newsletter