Obsnap Instruments Sdn Bhd
29A, Jalan SS 15/4C, 47500 Subang Jaya, Selangor, Malaysia.
Metrology: Before & Today
![Metrology: Before & Today](https://cdn1.npcdn.net/image/1552380822d82a87d8740cf44b347ad60fffbf3f21.jpg?md5id=64063a9bafbf19f37ef32a222116bcf1&new_width=760&new_height=1000&w=1466647023)
Metrology: Difference between Before & Today
BEFORE Did you know? It can take about 6 hours to determine the 27 dimensions of each 25 parts below with just a profile projector, calliper, micrometer and a height gauge?
The possibility of human error due to manual measurement; this can lead to inconsistency, time-wasted & complications in the recorded data. TODAY Thanks to modern technology, metrological & optical systems. Many of the measuring features are now automated and can take about 2 – 3 minutes!
(Video) SOLUTION Oasis Elite is an optical profile inspection system that can automatically capture a sample component / part in a digital format and converts the captured image into real dimensional data.
FEATURES
(Video) SOFTWARE (USER INTERFACE)
The colour coated display panel that shows the actual measured dimensions and the user-defined upper & lower limit tolerances. Pass/Warn/Fail indications are easily identifiable for all measurements using Green (Pass), Yellow (Warning), and Red (Fail).
(Video) Recommendation & Consultation on Metrology Equipment:
Refer to Mr. Loon, Product Specialist :
cc to Ms. Kan, Marketing Support : Brought to you by, Obsnap Instruments Sdn Bhd (599642-A) |